Maxibright DUO Digital Power Pack with Flip/Flop Technology

Maxibright Duo Digital Power Pack with Flip-Flop Technology
Download the Maxibright Duo 600W Digital Power Pack Data Sheet PDF »

The Maxibright DUO digital power pack uses Flip/Flop Technology to provide excellent flexibility. The DUO has six adjustable power settings, manual primary output and secondary output settings, an automatic 12 hour Flip/Flop setting and an automatic 1 hour Flip/Flop setting.

Use one DUO ballast to run two grow rooms alternately, by choosing either the manual primary/secondary output setting or automatically by selecting the 12 hour Flip/Flop setting.

Use one DUO ballast to run two lamps alternately in one grow room, by choosing either the manual primary/secondary output setting or automatically by selecting the 1 hour Flip/Flop setting. Use the 1 Hour Flip/Flop setting for short periods to significantly reduce the grow room temperature when the temperature reaches a critical level (This was proven by customer and our own test results)

Flip/Flop Technology inside the Maxibright DUO 600W ballast can be used to alternately illuminate two separate grow rooms on a 12 Hour cycle. Or use 1 Hour Flip/Flop Technology to reduce the grow room temperature by alternately switching between two lamps in one grow room.

Maxibright DUO grow room HID horticultural lighting

Key Features:

  • Flip/Flop Technology – 1Hour or 12 Hour options
  • Six power settings: 250W, 275W , 400W, 440W, 600W and 660W
  • Surge Control
  • Soft start technology
  • Fast lamp re-strike
  • Dynamic frequency control
  • End of lamp life detection
  • Short circuit protection
  • Thermal protection, auto reset
  • LED status with diagnostic feature
  • Silent, light weight and wall mountable
  • Runs high pressure sodium or metal halide lamps

Maxibright DUO Features Explained:

Surge Control

Developed with new Surge Control® software, when multiple DigiLight Pro® Select power packs are started from the same power supply they will safely ignite your lamps one at a time to reduce electrical surges.

Super Power Modes

Use the Super power modes to give each lamp 10% extra power for ultimate light control throughout your plant’s growth cycle.

Soft Start Technology

Gently starts the lamp with a low current for significantly improved lamp life and continually efficient output for maximum light.

Fast Lamp Re-Strike

Plants need a regulated day and night cycle. To limit the damage caused by unexpected interruptions to your plant lighting such as a power cut, fast lamp re-strike safely re-starts hot lamps as quickly as possible rather than waiting for them to cool.

Dynamic Frequency Control

Domestic power supplies naturally fluctuate in voltage. Dynamic frequency control regulates the ballast output to your lamps for efficient, maintained lamp output with no flickering during voltage fluctuations.